How To Uninstall Blinds On Windows

Download Article

Download Article

Broken or grimy blinds sometimes need to be taken down. There are multiple types of blinds, and each one can have a different mounting system. Blinds generally have mounting clips or a spring-loaded roller. No affair what kind of blinds you take, removing them is a unproblematic process that requires only a couple of tools. When you lot have them down, give them a thorough cleaning or supersede them to freshen upwardly your home.

1. 1

   Pull horizontal blinds and ringlet-up blinds all the mode upwards. Most horizontal and roll-up blinds come with a pull string. Pull the cord down toward you and to the left. If you lot don't see a string, tug the blinds down instead. Enhance the blinds until they are up against the headrail.^[ane]

   • For case, Roman blinds may not come with a pull string. Roman blinds are material coverings attached to a roller.
   • Pull the blinds up to make them easier to handle when you remove them. You may likewise need to access brackets behind the headrail, which is easier once the blinds are out of the way.

2. 2

   Rotate the vanes to half-open if you have vertical blinds. Vertical blinds are a trivial different and don't retract. Instead, use the rotating rod or dewdrop chain to open the vanes. Position the vanes so they are perpendicular to the headrail.^[2]

   • Rotating the vanes protects them from damage and helps you reach the clips locking them to the headrail.
   • If you're planning on saving the blinds to reuse them, you lot will need to remove the vanes earlier dismounting the headrail.

   Advertizement

3. iii

   Press the clips to elevator the valance if the headrail has ane. A valance is a decorative embrace on the front end of a headrail. Examine the ends of the valence to find the small clips securing it in place. Button the bottom edge of the valence down, then endeavor to pull it off the headrail. If the valence doesn't snap off, lift the bottom border once more, so employ a flathead screwdriver to pry the clip off of it.^[iii]

   • The valence clips go exposed to constant sunlight, so be conscientious when opening them. Old clips can be very brittle.

4. 4

   Check the headrail to find out how information technology attaches to the wall brackets. Climb upward on a ladder, if necessary, to discover the brackets underneath or beside the headrail. No thing what kind of blinds you have, in that location are several different ways they could exist installed. Well-nigh headrails have clips that attach to brackets screwed into the wall. Other types of blinds accept a spring system that pops off the wall.

   • Horizontal and Venetian blinds generally take open or airtight clips, making the headrail like shooting fish in a barrel to slide off the brackets.
   • Vertical blinds tend to accept clips you demand to press. Some headrails screw direct to the wall.
   • Roman and cellular blinds oftentimes have spring systems, although some versions besides have a tab that latches onto mounting brackets.
   • Roller blinds often have jump-loaded mounts that tin be released past using a screwdriver or turning a disk on the roller.

Advertizement

1. 1

   Open the brackets on the ends of the headrail using a screwdriver. Near horizontal blinds have small, square brackets on the forepart surface of the headrail. The brackets are similar pocket-sized doors that you can pry open with a flathead screwdriver. Wedge the head of the screwdriver between the bracket and the headrail, then elevator information technology up. Open up the subclass on the contrary end likewise.^[4]

   • The headrail usually volition non fall out until you start pulling on it. All the same, keep a hold on it at all times in case information technology happens to come loose afterward yous open the brackets.
   • These brackets are very noticeable if your blinds have them. If y'all don't see the square-shaped covers on the front of the headrail, look behind it.
   • Mini blinds have the same kind of bracket as regular horizontal blinds.

2. 2

   Pull the headrail toward y'all to detach the blinds from the wall. Once you accept the brackets open, nix will exist holding the headrail in place. Hold onto the headrail with both hands. Then, slide information technology out from the wall to remove information technology.^[5]

   • Hold the headrail with both hands to residuum it every bit yous bring it down toward you lot. Then, lay information technology downwardly on the floor.

3. 3

   Unscrew the brackets to remove them from the wall. The metal mounting brackets will remain on the wall. If you need to remove them, get a power drill fit with a Phillips head bit. Use it to rotate the screws counterclockwise. End by pulling the loosened screws and brackets off of the wall.^[6]

   • You can go out the brackets in place if you plan on putting the blinds back upwards.

Advertisement

1. 1

   Detach the vanes by opening the clips securing them to the headrail. Slide a flat object, such as a credit card, between the clip and one of the vanes. Equally you slide the bill of fare up, button the vane upward gently toward the headrail. Then, pull both downward at the same time to detach the vane. Y'all volition need to repeat the procedure for each vane.^[7]

   • Removing the vanes by hand may seem a lilliputian tiresome, just information technology protects them from damage. If you lot don't plan on reusing the blinds, doing this is less important merely even so makes the blinds easier to motility.
   • Some types of clips tin can be opened past hand. If you're not having whatsoever luck using a credit card, gently elevator the clips and pull the vanes out.

2. two

   Unscrew the headrail if it is attached to the wall. Stand up underneath the blinds and look up at the headrail. You may be able to spot screws passing through the headrail and into the wall. Turn the screws counterclockwise until the headrail comes off of the wall. Hold onto the headrail to foreclose it from falling once it comes loose.

   • This type of zipper is common with inside-mounted blinds. Within-mounted headrails sit down inside the window frame. Outside-mounted blinds attach through brackets screwed to the window frame.

3. 3

   Utilize a screwdriver to open the bracket clips if your blinds take them. If the headrail isn't screwed straight to the wall, information technology will take a pair of brackets and connecting clips on its back side. Stick the tip of the screwdriver between the prune and the headrail, and so turn information technology until the headrail pops free. Loosen the other clip as well to remove the blinds.^[8]

   • The clips will be betwixt the wall and the headrail. You should be able to run into them slightly sticking out from the blinds.

4. 4

   Remove the mounting brackets by unscrewing them from the wall. Notice the metallic brackets where the clips were if your blinds had them. Install a Phillips head drill bit into a power drill. Use it to plough the screws counterclockwise until you lot are able to slide the brackets off the wall.^[9]

Advertizement

1. one

   Press the headrail back to loosen it. Catch it with both hands and movement it toward the window. Push gently to avert knocking it into the glass. Equally you lot push it, you lot should feel it begin to come up out of the brackets.^[10]

   • The metal brackets are hidden on top of the headrail. Both Roman and cellular blinds tend to take this kind of attachment mechanism.
   • Roman blinds are shades that fold up when you pull on them. Cellular blinds are honeycomb-shaped shades.

2. 2

   Tilt the headrail and pull it toward you to detach it. Roll the bottom edge of the headrail back toward y'all. Proceed moving it until its bottom edge is correct over your head. Then, pull the headrail downward to snap it off the wall.^[11]

   • The headrail has to be pushed back showtime in social club to unlock the brackets. If you endeavor to pull the headrail out right away, information technology won't budge.

3. three

   Release the brackets with a screwdriver if yous can't remove the headrail. Your blinds will most likely have clips that demand to be unlocked. Await at the dorsum cease of the metal brackets. Insert the tip of a flathead screwdriver between 1 of the subclass and the headrail. Twist information technology, then do the same to the other bracket to unlock it.^[12]

   • Cordless Roman and cellular blinds sometimes accept bracket clips. If you can't motion the headrail past hand, check the brackets.
   • Keep one manus on the headrail. The blinds will fall once you lot unlock both clips.

Advertisement

1. 1

   Utilise a screwdriver to remove the child safety prune if you have 1 installed. The safety clip is a wall-mounted piece of plastic that is dissever from the blinds. If yous have one, the pull string or chain will be wrapped around information technology. Locate the screw in the eye of the clip and turn it counterclockwise to remove information technology.^[13]

   • Your blinds may not have such a clip, and then you lot tin focus on dealing with the roller.

2. ii

   Unlock the roller by turning its disk if it has one. Check the roller for a small, serrated disk barely sticking out on one cease. Spin it counterclockwise by mitt until you lot hear information technology click. The click ways you have successfully unlocked the bracket and tin pull downwards the roller when yous are ready.^[xiv]

   • The deejay is usually on the side opposite from the pull chain.
   • If the wheel is stuck, push it with a ho-hum knife or a similar tool.

3. 3

   Push the pivot on the roller to free it from the mountain. If y'all don't see a bike on the finish of the roller, look for a moveable cap on the end of the roller. Slide a flathead screwdriver between the cap and the rest of the roller. While holding the roller with your free hand, push the screwdriver up against it to free it from the subclass.^[fifteen]

   • The pin is oft on the end opposite from the pull concatenation. Information technology is pretty pocket-sized, and so climb upwardly on a ladder to get a shut expect at the roller.
   • You may besides need to slide a flathead screwdriver between the roller and the brackets to unlock the mounting clamps. Pry the roller toward you to remove it.

4. 4

   Lift the roller off the mounting bracket. Hold it with both hands and pull it toward you. If it doesn't come up out right away, don't strength it. Check to come across where it is stuck. It may still be locked in place by a clamp, pin, or another component.^[sixteen]

   • Y'all may need to push the roller in and then lower it toward you to get it off the mounting brackets.

5. 5

   Unscrew the mounting brackets to remove them. Use a power drill with a Phillips head drill bit on the screws holding the brackets to the wall. Turn the screws counterclockwise. In one case they are loose, pull them out along with the brackets.^[17]

Advertizing

Enquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertizement

• To avert spreading dust throughout your home, wipe blinds clean earlier pulling them downwards.

• If you plan on rehanging the blinds, requite them a deep cleaning with soap and water.

• You can set up erstwhile blinds after taking them off the wall. For instance, replace slats, vanes, and broken strings.

Thank you for submitting a tip for review!

Advertisement

Things You'll Need

• Power drill
• Phillips head bit
• Flathead screwdriver
• Ladder

About This Article

Thank you to all authors for creating a folio that has been read 63,551 times.

Did this article help you?

Source: https://www.wikihow.com/Take-Blinds-Down

Posted by: martintagazier1947.blogspot.com

Share this post