How To Clean Water Stains On Carrara Marble

Remove Water Stains on Carrara Marble

QUESTION:

Nosotros are getting water stains that nosotros cannot clean off.

How do you remove water stains from Carrara marble?

ANSWER:

Water stains cannot be "cleaned" off. Water stains are removed by repolishing the damaged expanse. The verbal method of repolishing depends on the severity of the stains and the type of surface end every bit explained below.

Then, the "water stains" you lot are seeing on your Carrara marble are not from water and they are not truthful "stains".

Let'southward showtime correctly identify and clarify the problem and then we'll discuss the solutions.

Jump to Solutions department

"Water stains" are a mutual outcome with marble countertops simply pure water will non stain or damage marble.

Carving is the cause of these seemingly transparent or chalky boring spots (as seen in the photo at the top of the folio).

It happens on all marble including Carrara marble, also as, travertine, limestone, and onyx. All these stones are related and take like characteristics.

Marble is made of calcium carbonate and reacts chemically with acidic things similar java, juice, soda, wine, fruit, dressings, sauces, alcoholic drinks, and the list goes on.

So, it's a known marble maintenance consequence and a real nuisance for cleaning marble kitchen countertops since it'south impossible to foreclose etching in the kitchen. Just too many acidic foods to avoid contact.

Notation: etching too occurs when cleaning marble with the wrong type of products. That's why y'all should only use condom products for cleaning marble.

Etching is like a chemical burn. This caustic reaction "etches" or corrodes the surface eating away the polished or honed surface layer causing the appearance of the clear but dull spots.

People frequently call these "water stains" because they seem to be caused by h2o and wait clear. Water tin, in some rare cases, cause carving when the urban center h2o or well h2o is acidic but water is not the cause in 99% of cases.

Carving is almost noticeable on polished marble. Honed marble has a matte surface that volition still react and etch, but the result (dull spot) is not as visible since the surface is already somewhat ho-hum… not reflective like polished marble.

H2o Stains vs. True Stains

Information technology's confusing that the word "stain" is used for a few different types of spots or cleaning bug on marble.

Here's how it breaks downwards....

As explained in a higher place "water stains" are a misnomer. These spots and rings are etch marks. Not

stains and not caused past water.

True marble stains are a totally different creature and this is a HUGE point of confusion not only for homeowners but for many in the stone industry, if you tin can believe information technology!

Stains are dark spots where a liquid has absorbed. Etch marks are low-cal or chalky spots where chemical corrosion of the marble has occurred.

You'll often read or hear that "marble stains easy...". This is NOT true. Marble etches hands and people go the 2 different types of spots confused.

This Marble Stain Removal Poultice will remove "truthful" dark-spot stains. Or follow the DIY instructions in our Removing Granite & Marble Stains eastward-volume.

And difficult water stains are in a third category. These tin can have a similar chalky look like etch marks just are not stains or spots at all. Nothing has absorbed and the surface is not damaged.

Hard h2o stains are simply calcium deposits (left by evaporated water) stuck to the countertop surface.... on peak of the countertop or tile. These occur mainly around the sink and in showers.

This Hard Water / Lather Film Remover volition safely clean hard water deposits on marble.

Now... back to etch mark "water stains" that can't exist cleaned off...

How To Remove H2o Stains on Marble

What we are really discussing, so, is how to remove etch marks since water doesn't actually cause these dull spots and they are not actually "stains" but rather "compose" marks.

The repair for water stains is a matter of restoring the surface finish vs. "removing" the spot. Nothing is on the marble. The surface has been damaged so it must be refinished.

On polished marble countertops and floors, you tin repair these spots using this ETCH REMOVER / Marble Polishing product made specifically for this purpose.

Very like shooting fish in a barrel-to-apply DIY product and volition restore the smooth and color most instantly. A must-have product for marble owners.

For honed marble surfaces restoring etch marks is different than on a polished marble. Unfortunately, there's no product to apply, but the DIY fix is cheap and relatively easy.

Consummate instructions provided in the Restoring Marble Carving e-book.

If compose marks are crude to the touch you lot may need to hire a professional to refinish the surface. This is a more severe etching that requires dissimilar handling but rarely occurs.

Applying a sealer does NOT prevent physical damage to natural stone like scratching or carving. This is a common misconception. Sealing helps prevent staining only.

Source: https://www.countertopspecialty.com/remove-water-stains-on-carrara-marble.html

Posted by: martintagazier1947.blogspot.com

Share this post